Showing 37–48 of 279 results
Showing 37–48 of 279 results
Younglook Windshield Wiper Blades to Skyrocket Your Brand
First let’s talk about types of wiper blade
Flat Wiper Blade
Younglook Flat wiper blades are the best you can buy. Made of
high-quality material to ensure you solid and silent operation and
streak free wiping. Just excellent and long-lasting performances for
great prices. This design allows for a flatter aerodynamic shape which
reduces wind noise.
The internal metal strip applies constant pressure along the length
of the blade and has a built in spoiler. Being smaller than a
conventional wiper it also provides less obstruction to the driver’s
field of vision.
Metal Wiper Blade
Metal wiper blades are the most common type of windscreen wiper,
often referred to as looking like a coat hanger and are still fitted to
the majority of new vehicles, although this is in decline.
They are usually attached to the vehicle using a hook shape wiper arm
fitting. Sizes range from 10″ to 28″ and it is not uncommon to have
different sizes fitted to the drivers and passengers sides of the
windscreen.
Hybrid Wiper Blades
Hybrid wiper blades features a high-strength polymer shell and a
spring steel beam structure. Beam blade performance mixed with added
protection is a winning combination.
This allows for a smoother airflow, which in turn creates an even
down force along the entire length of the blade. Under this skin is the
steel sub-structure which provides a sturdy support for the rubber
wiping element.This ingenious design allows the whole wiper to flex to
the shape of the windscreen producing a smooth, efficient and quiet
wiping action.
Winter Wiper Blade
When cold weather gets extreme, Younglook Winter wiper blades can stand up to even the harshest conditions.
Younglook winter wiper blades is a rugged and durable winter wiper
blade designed specifically to combat severe weather and still offer
optimal performance. Flexible beam blade design coupled with
synthetic-blended armor for an infinitely flexible blade that can see
you through even the worst driving conditions.
Rear Wiper Blade
Designed for original equipment fit and performance
Younglook Rear wiper blades provide original equipment quality design
for vehicles originally installed with composite rear blade technology
Rear wiper blades are often neglected and forgotten until they are
needed and then it is too late. Replacing your worn out rear wiper blade
with Younglook Rear Wiper blade is the smart solution. It will deliver
smooth, streak-free wipes with quiet operation, for a clear view to the
rear of your vehicle
Multifit Wiper Blades
Multi-Fit Connector – High Performance, fits most vehicles and wiper arm types
Using modern Flat Blade technology with incorporated aerodynamic wind
foil. These blades are suitable for over 98% of passenger vehicles with
no need to mess around with multiple fitting adaptors!
One connector does it all! Younglook Flat Blades consistently wipe
cleanly and the incorporated aerofoil keeps the wiper blade down on the
windscreen where it should be, even at high speed, with strong
crosswinds and buffeting gusts caused by oncoming traffic and large
trucks!High quality treated natural rubber for clean noise free wiping.
How To Find The Correct Wiper Blades Size
If you don’t know your wiper blade sizes,
you’re not alone. Every day customers contact Younglook asking for help
to find the right wiper blade size for their car.
Younglook Windscreen wipers keep your
view of the road clear, providing a crucial safety feature when driving
in poor weather. Therefore, it’s important to maintain and replace your
wiper blades and failure to do so can result in an MOT failure.
Luckily, thanks to Younglook’s professional service, finding the correct sized wiper blade and getting your old ones changed couldn’t be easier.
Why does wiper blade size matter?
You must replace the wiper blades on your
car with the same size. This ensures that when the wiper is working,
there will be no missed areas, or the two wipers will overlap, causing
the wiper to fail to work. Younglook will introduce it in detail below.
When people talk about windscreen wiper
size, they usually mean wiper blade size. The blade being the removable
strip that connects to the arm and makes contact with the windscreen.
Windscreen wiper blade sizes are measured
in millimeters or inches, which refers to the length of the blade.
There are a range of wiper blades available, in sizes from 9″ to 32″ or
250mm through to 813mm.
If you replace your wiper blades with
smaller blades, they won’t cover the entire windscreen – leaving gaps.
Use wiper blades that are too big, and they will wear out more quickly.
Any rubber left dangling at the end of the wiper can become tangled or
damaged.
Through the service of Younglook professionals,
we can change your wiper blades for you, but before this you will need
to find the correct wiper blade size. At the same time, our
professionals will provide installation videos or installation manuals
for your customers to install. Wipers, fast and good.
Finding replacement windscreen wiper blades
Buying cheap wiper blades is a false economy, with inferior quality
parts wearing out more quickly than high-quality replacements.
The brands we know are Halfords windscreen wiper blades alongside
Bosch wiper blades, but they are too expensive and many customers will
be confused by their prices scare away.
You can try YOUNGLOOK wipers. Its raw material suppliers are the same
as BOSCH and VALEO, and the quality is as good as them. The price is
very competitive
We also have a range of silicone blades available, which continually reapply an active silicone coating to the
windscreen to promote water beading and ensure a streak-free finish.
More resilient to heat, cold and UV rays, these blades last twice as
long as standard rubber wiper blades.
If you want to help customers save the cost of going to the store to
install wipers, you can follow our installation guide or installation
video to easily help customers solve installation problems.
How to choose suitable wipers for us? Younglook wipers factory gives professional answers
For a car driving on the road. wiper
blade windshield plays an important role. Younglook wiper blades
manufacturers have been developing professional wipers for many years.
The following is a detailed introduction to wipers and teaches you how
to choose a wiper blade windshield.
Which one is better, metal frame wiper blade, flat wiper blade or hybrid wiper blade?
What are the advantages and disadvantages of each? You will understand after reading the 4 test comparisons below:
In order to test the accuracy, I used the same car for this test, and before testing different wiper blade windshield
I would wash the glass, then turn on the wiper for 1 minute, and
collect the highest decibel of the wiper blade windshield in the car
when it is working. and the two lowest decibel numbers, and finally take
the average value.
Before
the test, I simulated rain falling on the windshield without opening
the wiper blade windshield, and then recorded the decibel value in the
car, which was basically stable at around 45 decibels.
Noise testing
The lowest decibel, highest decibel and average values of the three wipers when working are as follows
Metal fram wiper blade
Flat wiper blade
Hybrid wiper blade
During the test, we can clearly see that when the metal wiper blades
and hybrid wiper blades switch from up to down, the deformation
amplitude of the rubber strip and the structure of the wiper itself is
relatively large.
As for the flat wiper blades with the smallest noise, the deformation
of the rubber strip and the wiper itself is the smallest.this is its
structural advantage
Of course，The material used in wiper rubber is also one of the
reasons that affects the noise. For example, Younglook’s boneless wipers
use natural rubber from Vietnam’s Dajinbei. Its toughness and wear
resistance are better than synthetic rubber, so it can also allow the
rubber strips to be placed up and down. There is stronger support when
switching and the silent wiping effect remains longer.
Summarize：Hybrid wiper blades>Metal fram wiper blade>Flat wiper blade
Why Choose Younglook wiper blades?
Quality commitment
Our defect rate of less than 20 per million units puts us ahead of
most others in the industry. This is reinforced by the certification of
ISO9001:2015 Quality Management Systems which will assist in further
improving our customer satisfaction.
Competitive Price
Wholesale directly from the YOUNGLOOK factory, reducing the middlemen and making the difference.
How is wiper blades rubber made step by step?
Take everyone to “supervise” the whole process of wiper blades production
natural rubber
The rubber strip is the key to determining the quality of the wiper
To make good adhesive strips, you must start with raw materials! The
picture above shows Dajinbei natural rubber imported from Vietnam, which
is also the raw material for wiper strips! Each piece weighs
approximately 33KG.
carbon black
There is another very important raw material for making wiper strips, which is carbon black.
The
reason why wiper strips are wear-resistant is because carbon black is
added to natural rubber. This factory’s wiper strips use carbon black
from the American brand Cabot, which is mixed and mixed at a ratio of
10:1 between natural rubber and carbon black.
Kneading rubber roll
Kneading is to put the natural rubber into a mixing machine, crush and stir it for 11 minutes
and then repeatedly press it into tablets by an open mill to squeeze
out the air inside, and finally it becomes something similar to a Swiss
bread roll as shown in the picture above. rubber roll
black rubber block
It then enters another internal mixer together with carbon black, and is finally refined into black rubber blocks.
These rubber blocks will immediately enter the second open mill and
be repeatedly pressed into tablets at least five times. Some other
formulas will be added during this process. , until the workers make
sure that all the raw materials inside have been mixed evenly.
second black rubber blacks
Then it enters another internal mixer together with carbon black, and is finally refined into black rubber blocks.
These rubber blocks will immediately enter the second open mill and
be repeatedly pressed into tablets at least five times. Some other
materials will be added in the process. formula until the worker is sure
that all the raw materials have been mixed evenly
Rubber high teperature setting
Then these rubber sheets will be sent to
the vulcanization and shaping workshop to complete the rubber
vulcanization and wiper strip shaping operations.
But in fact, the high-temperature vulcanization and shaping of the rubber block are completed at the same time.
Rubbers preliminary completed
The adhesive strips just produced are actually a pair stuck together.
The workers put the rubber skin into the mold as a whole, and after
200 seconds of high-temperature shaping at 180 degrees Celsius, ten
pairs of rubber strips were produced.
pickling rubbers
To process these rubbers, first pickle these rubbers to roughen their
surface, and then spray graphite to allow the graphite to evenly adsorb
on the rough rubbers and restore the luster of the rubber strips.
Let’s do a test with Younglook
Rubbing two rubbres
I rubbed the rubbers that had been
pickled and sprayed and the rubbers that had not been pickled and
sprayed against each other, and found that the difference was not that
big!
Rubbers without acid-washed nozzles have very high resistance when
rubbing against each other, and there is an obvious rubber friction
sound.
wiper rubbers finished Perfect
Rubbers that have been pickled and sprayed are very slippery and make no sound when they rub against each other.
The spray coating treated by Rubbers will almost never come off, so this ensures that the strip will make no noise when used.
The last step is to put the paired rubbers through a double-knife
cutting machine and cut the connected pair of rubber strips from the
middle to get a perfect pair of wiper rubbers!
In other sections, I will continue to update the wiper
production process, so that you can rest assured that you can wholesale
wipers from me. I am responsible for you and your customers. Customer
satisfaction is our first goal.
Wiper Blade Testing
Younglook wiper blades can only be sold
after passing the five tests of high and low temperature test,
antioxidant test, UV resistance test, 1 million scratch test and
anti-delay test.
High and low temperature test
We only need to put the finished wiper blades into the high and low
temperature test box, and then repeatedly jump horizontally at high
temperatures of -40°C and 80°C within 72 hours, and then observe whether
there is melting or freezing cracking on the surface of the wiper. No.
Only qualified
Antioxidant test
This test requires disassembling the wiper rubbers, fixing them on
the detector, and then exposing them to ozone concentrations as high as
50PPHM for 72 hours. Finally, take them out and magnify them five times
under a magnifying glass to observe whether there are traces of cracks
on the surface of the rubber strips caused by oxidation. , to be
considered qualified if there is none.
UV resistance test
This test mainly tests the plastic shell of the wiper, that is, the
deflector and buckle. It exposes them to strong ultraviolet rays for 72
hours, and then observes whether there is any plastic aging on their
surface. If not, they are considered qualified.
Wiper blades usage test 1 million times
To be considered qualified, the wipers need to be able to wipe the
glass clean and make no abnormal noise after 1 million rounds of
back-and-forth in a simulated use environment.
When I went there, a pair of wipers in the laboratory had been wiped
more than 310,000 times. However, I did not hear any abnormal noise and
the windshield was still very clean.
Salt spray resistance test
This test is to test the corrosion resistance of the wiper steel
bars. The salt spray machine creates high-concentration salt spray that
causes metal to quickly rust and corrode. The wiper steel bars must
ensure that they will not be exposed to high-concentration salt spray
within 48 hours. Only when it is rusty can it be considered qualified.
With Certificates to Prove it, Our Strength Is Guaranteed
As one of the best wiper blades manufacturers, Younglook has passed a lot of certifications like ISO 9001, SGS, CE, and more.
Whether you need car wiper blades or need to custom any wiper blades product, Younglook can always satisfy your needs
Besides Wiper blades, Younglook can also manufacture other wiper arm,wiper motor,wiper link, and more
Get an instant quote for Your next wiper blades sheet order!
Certifications
IATF 16949
TS16969
ISO 9001
Quality System
Urkunde
United states
Our Factory
How is the wholesale wiper blade business?
As the number of cars continues to increase, so does the demand for wiper blades.
Therefore, the wholesale wiper blade market has huge potential.
1. The wholesale wiper blade market is in high demand.
The automobile industry is a huge industry, and a large number of
cars are produced every day. These cars require replacement of wiper
blades to keep them functioning properly, so wiper blades are in high
demand. In addition, as people’s requirements for automobile safety and
comfort continue to increase, the demand for wiper blades is also
increasing.
2. Wholesale wiper blades are highly profitable
Since wiper blades are a consumable item, car owners need to replace
them frequently. Therefore, wholesalers can obtain lower costs through
bulk purchases and higher profits through high sales volume. In
addition, due to the fierce market competition, wholesalers can attract
more customers by providing high-quality services and preferential
prices.
Finally, the prospects for the wholesale wiper blade market are promising.
With the development of the automobile industry and people’s
increasing requirements for automobile safety and comfort, the demand
for wiper blades is also increasing.
