1.Don’t dry scrape! If the windshield is stained with dust, sand and other foreign objects, do not dry scrape with wiper blades! Because dry scraping will not only damage the rubber strip, but also may scratch the windshield. The correct way to do this is to remove debris with a towel, spray it with glass water, and then use wiper blades to clean it when the windshield is wet.
2.Protect from prolonged sun exposure! Prolonged exposure of wiper blades to the sun accelerates aging, resulting in cracking or deformation. If the windshield continues to be used after being contaminated with dirt, its performance will be further degraded.
3.Don’t forget the wipers for car washes! In addition to cleaning the windshield every time you wash the car, you should also use a special cleaning fluid to wipe off dust, sand, etc. on the wiper blades, so as to improve the service life of the wiper blades.
4.Remember to maintain it regularly! It is recommended to maintain the wiper system every six months, check the wiper strip, adjust the wiper arm angle and pressure, etc. If the rubber strip is found to be aged and hardened, it is recommended to replace it in time; If there is vibration or abnormal noise when wiping water, or there is uneven swing of the wiper arm, leakage and other phenomena, be sure to repair or replace it in time