Windscreen Wiper Rubber Refills

Product Description

YOUNGLOOK Flat Wiper Blade Refill can provide optimum vision in different types of driving conditions (Raining Snow in winter season).

Natural Rubber Technology: Natural rubber materials make sure the wiping is the best. Tec3 advanced rubber technology with protective coating offers longer life lasting, edge delivers the ultimate smooth, clean, streak free and chatter free wipers.

Our Advantages

Manufacturer of Different Windshield Wiper Blades Refills

High quality: Our products have been certified by TS16949.

FAQ

How to replace wiper blade Refills?

Here we can show you How to change your windshield wiper blades at home in five easy steps:

1. Measure your blades, and buy replacement blades.

2. Carefully raise the first wiper arm until it is perpendicular with the windshield.

3. Press the plastic stopper holding the old blade in place, and unhook your old wiper blade

4. Put the new wiper blade refill on the structure of the wiper blade after you pull the old refills.

5. Make sure the end refill insert is fasten installed and then put the wiper blade in the arms.

Common Wiper Blade Issues and How to Fix Them

Wiper blades should not cause headaches at first. But time will take a toll on quality and performance, causing all sorts of problems. Sometimes, factory defects or inferior-quality blades will even show issues, even for brand-new wipers. Thus, it helps to know the common problems associated with the use of wiper blades. There are quick fixes to some of these problems other than replacement.

Water Smearing

Smearing is a common problem in cold areas, but it could also appear due to worn-out blades, dirty windshields, and inferior-quality wiper fluid. Sometimes, cleaning the windscreen with soap and water will do. Better yet, use a specially formulated windshield washer fluid for a more efficient job and glossy finish. If the problem persists, the wiper blade has likely worn-out and requires immediate replacement. In some cases, smearing happens because of loose contact of the wiper blade with the windshield’s surface due to wear and tear or decreased pressure points, leaving behind uncleaned areas. Upgrading to a more superior brand with a higher grade should minimize smearing.

Wiper Chattering or Juddering

Another common wiper blade problem is juddering or chattering, which usually happens when there is excessive friction between the windshield and the wiper blade. This causes the wiper blade to stick and jump, leaving behind some annoying streak marks on the path parallel with the wiper blade. There are a few possible reasons for the wiper blades to chatter. One is dirt, and a simple cleaning will fix the problem just like smearing. Another possible reason is loose contact. There is not enough pressure on the wiper blades against the windscreen to provide crystal-clear wipes due to poor frame design. Realigning the wiper blade using pliers may get rid of the problem. When it’s time for replacement, make sure to upgrade to superior-quality wiper blades to minimize or prevent chattering.

Tips

This is aftermarket part manufactured, All of products tested to match OEM products, as good as even better than the originals.

You can use the VIN to obtain the original part Number to choose the correct wiper blade refills sizes to make sure the right part for your vehicle. Any questions, please contact with us for more details.

More Inquiry please leave us message or Younglook Technology email:[email protected]

MR.Jacky WhatsApp:+86 13625004686

Hot Tags: windscreen wiper rubber refills, China windscreen wiper rubber refills manufacturers, suppliers, factory, 32 wiper blade refills, BOSCH AUDI Q7 rear wiper blade, Customized honda oem windshield wipers, Customized BMW N55 Valvetronic Motor, 12 inch wiper refill, bmw x5 e70 wiper blades Suppliers