There are two sprayers in front of the windshield. Especially in areas with heavy water stains, if you like to add tap water or dishwashing liquid, etc., it is easy to have non-spraying or misaligned nozzles.
First scenario: The nozzle is clogged and not spraying water. Recently, I found that one windshield washer nozzle of my car was clogged and not spraying water, so I cleared it myself. Take a needle or a thin piece of wire and insert it into the clogged small hole, slightly move the metal wire to clear it, and the nozzle can spray water. It only takes one minute to fix it. Sometimes, although the nozzle can spray water, it sprays too high, which means that the angle of the nozzle needs to be adjusted. Similarly, use a needle to insert into the nozzle and press it down if the water sprays too high, and adjust it while spraying water.
Second scenario: The water in the 2007 honda civic hybrid wiper blades water container is used up. The windshield washer container is generally designed in the engine compartment of the car, usually on the left side of the compartment. Although the water filling port of the windshield washer can be seen by opening the hood, the water container inner tank is located in the middle position of the engine compartment, so we cannot directly see whether there is water inside the container. If the water level of the container is too low and the sprayer cannot reach it, the wiper will not spray water. In this scenario, just add water to the windshield washer container and the wiper will return to normal operation.
In conclusion, solving the problem of non-spraying water of the champion hybrid wiper blades is actually very simple, and you can do it yourself.